Set a password Sometimes the problem may be in an outdated router. Increasing the speed of the Internet via Wi-Fi in this case is easy, by choosing the right router. If you last bought a router 5 years ago, it was very budget – it’s time to change the equipment to more modern.
For example, you have connected a 300 Mbit/sec tariff. The speed corresponds via the wire, but not via Wi-Fi. What to do? Check the technical specifications of the router. There is a chance that its throughput is up to 100 Mbit/sec, so it will not give out more. In this case, you need to buy or rent a router that is compatible with your new tariff.
Change equipment
Sometimes the reasons for the speed drop can be “guests” who use your Internet for free and increase the load on the network. Therefore, if there is no password on the router, you need to set it. If there is, change it.
A good password consists of 8-10 uppercase and lowercase home owner data letters, contains numbers and special characters, and is not tied to any information about you (name, date of birth, pet name, etc.).
Switch to 5 GHz (Wi-Fi)
Set a password Many modern routers create 2 networks at once – 2.4 and 5 GHz. Make sure you are connected to the latter. The 5 GHz signal is more stable and provides higher speed, unlike its predecessor.
It’s even better if your router can use two ranges, switching sergio urena general manager from the busier one to the free one.
Change DNS Server
The DNS server is responsible for decoding addresses. In fact, when you enter an address in the address bar, for example, yandex.ru or provodnoi.ru, you are accessing the DNS, which translates the “letter designation” into an IP address, and then sends a request to it. And if this server is slow, then the pages will load longer.
To change the DNS server, go to the computer settings, find mobile database the item “Network and Internet”. Right-click on the active connection, select “Properties”, find the item “IP version 4 (TCP/IPv4)” in the list and, having selected it, click “Properties” again. Move the switch to the state “Use the following DNS server addresses:” and enter.
After this, you can notice an increase in speed.